2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal
2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal
2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal
2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal
2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal

2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal

MPN: E2613A
Product Brand: HP Agilent
Product Condition: New
Excluding VAT: £95.00
Including VAT: £114.00
2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal

Part Number: E2613A
NEW

Included:
2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal More Info:
The Keysig...
Information

2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal

Part Number: E2613A
NEW

Included:

  • 2 x New HP Agilent E2613A 0.5MM Wedge Probe Adapter For TQFP AND PQFP 3 Signal
More Info:
The Keysight E2613A is a wedge probe adapter for thin quad flat pack (TQFP) and plastic quad flat pack (PQFP) surface mounted ICs. If you have ever tried to probe a surface mount component, you have probably experienced one or more of the following frustrating situations: accidentally shorting IC pins together; electrical and/or mechanical problems with soldering small wires onto leads; and/or holding multiple probes and trying to use your scope at the same time. The Keysight Wedge Probe Adapter provides a solution to these frustrations.
It is easy to insert and stays put - no need to solder small wires onto leads. The Wedge is mechanically non-invasive, so you will not damage the legs of the IC. It makes two contact points with each leg of the IC. This redundant physical connection increases the electrical reliability of the connection.
Key Features
  • Easy connection to surface mount ICs
  • Safe, with no chance of shorting
  • Mechanically non-invasive contact
  • Operating voltage: less than 40 V (dc + peak ac)
  • Operating current: 0.5 A maximum
  • Capacitance between contacts: 2 pF (typical)
  • Self-inductance: 15 nH (typical)
  • Contact resistance: less than 0.1 Ohm
 

AJ 276512 -2
Specifications
  • MPN:
    E2613A

To request a price please fill out the form below...


Close