Fast UK, EU and Worldwide Delivery with DHL Express UPS

Home / Other  /  Abatron AG BDI2000/C High Speed BDM/JTag Debug Interface

Abatron AG BDI2000/C High Speed BDM/JTag Debug Interface

MPN: BDI2000/C
Product Brand: Abatron
Product Condition: Used
Excluding VAT: £237.50
Including VAT: £285.00
Abatron AG BDI2000/C High Speed BDM/JTag Debug Interface

Model Number: BDI2000/C
In good condition and in full working order
AC Power Adapter Not Included

Included:
1 x Abatron AG BDI2000/C High Speed BDM/JTag Deb...
Information

Abatron AG BDI2000/C High Speed BDM/JTag Debug Interface

Model Number: BDI2000/C

In good condition and in full working order

AC Power Adapter Not Included

Included:

  • 1 x Abatron AG BDI2000/C High Speed BDM/JTag Debug Interface
More Info:
  • BDM support for CPU16/32/32+, PowerPC 5xx/8xx, ColdFire
  • JTAG support for ARM, M-CORE, PowerPC 4xx/6xx/7xx/74xx,
  • PowerPC 82xx/83xx/85xx, XScale, MIPS32, MIPS64
  • Host communication via RS232 and Ethernet
  • Program download speed up to 340 Kbytes/s
  • Target communication speed up to 16 Mbit/s
  • Supports target system voltage from 1.8 - 5 V
  • Same hardware for all supported targets and debuggers
  • Flash memory on-board programming
  • Robust EMC-optimized design
On-chip Debugging
The increasing complexity of today's software and hardware designs is leading to some fresh approaches to debugging. Silicon manufacturers offer more and more on-chip debugging features for emulation of new processors.
This capability, implemented in various processors under such names as Background Debug Mode (BDM), JTAG and on-chip emulation, puts basic debugging functions on the chip itself. With BDM or JTAG debug port, you control and monitor the microcontroller solely through the stable on-chip debugging services. This debugging mode runs even when the target system crashes and enables developers to continue investigating the cause of the crash. You won't waste time and target resources with a software ROM monitor, and you eliminate the cabling problems typical of ICEs.
Capitalizing on this technology, Abatron offers the high-speed BDI2000 BDM/JTAG interface with a comprehensive support for debuggers from leading vendors. BDI2000 allows communication via RS232 or 10 BASE-T Ethernet between the development computer and the BDM/JTAG interface of the target system.
High Performance
The BDI2000 communicates with the target system with up to 16 Mbit/s and allows very fast program download rates of up to 340 Kbytes/s.
In most cases, the BDI2000 and the associated software packages eliminate the need for expensive hardware such as an incircuit emulator. Even better, the BDI2000 accesses the on-chip emulation capabilities of today's newest processors which aren't supported by traditional ICEs.
Flexible Hardware
As a result of consistent implementation of latest technology, the BDI2000 is optimally prepared for further enhancements.
The firmware and the programmable logic of the BDI2000 can be updated by the user with a simple Windows based configuration program. The BDI2000 supports target systems from 1.8 Volts to 5.0 Volts.
Typical Application
The following example shows BDM/ JTAG debugging via 10 BASE-T Ethernet connection.
Specifications
  • Operating Voltage Limiting 5 VDC ± 0.25 V
  • Power Supply Current typ. 500 mA
  • Baud Rates (RS232) max. 115 Kbaud
  • Network Interface 10 BASE-T
  • Target Interface BDM and JTAG
  • Serial Transfer Rate between BDI and Target up to 16 Mbit/s
  • Supported Target Voltage 1.8 ... 5 VDC (Rev. C)
  • Operating Temperature + 5 °C ... + 60 °C
  • Storage Temperature - 20 °C ... + 65 °C
  • Relative Humidity (non-condensing) < 90% rF
  • Size (without cables) 190 x 110 x 35 mm
  • Electromagnetic Compatibility (EMC) EN 50081-2, EN 50082-2
  • Restriction of Hazardous Substances RoHS 2002/95/EC compliant
 
AJ 276352 -8
Specifications
  • MPN:
    BDI2000/C

To request a price please fill out the form below...


Close