Information
Agilent/HP E4419A EPM Series Power Meter 50-60Hz 250V With Option 003
In Good Condition
Full Working Order
Included
- 1 x Agilent/HP E4419A EPM Series Power Meter 50-60Hz 250V -70 dBm to +44 dBm With Option 003
The HP EPM E4419A is a low-cost, high-performance, single-channel, programmable power meter. It is fully compatible with the HP 8480 series of power sensors and the ECP series of power sensors. Depending upon which sensor is used, the HP EPM E4419A can measure from -70 dBm to +44 dBm at frequencies from 100 kHz to 110 GHz. Designed for bench and automatic test equipment (ATE) use, the EPM-E4419A makes fast (up to 200 readings per second with ECP series sensors), accurate and repeatable power measurements.
The EPM E4419A power meter has a high-resolution LCD display with LED backlighting and contrast control. This allows users to see the power readings from a distance, at a wide viewing angle and in a variety of lighting conditions. The user interface is easy to learn and use, with hardkeys for the most frequently used functions, and softkey menus to simplify instrument configuration for different applications. Ten instrument configurations can be saved and recalled, reducing the need to repeat setup sequences.
Specifications
- Frequency Range: 100 kHz to 50 GHz and 75 GHz to 110 GHz, sensor dependent
- Power Range: -70 dBm to +44 dBm (100 pW to 25 W), sensor dependent
- Power Sensors: Compatible with all HP 8480 series and HP ECP series sensors
- Single Sensor Dynamic Range:
- 90 dB maximum (HP ECP series sensors)
- 50 dB maximum (HP 8480 series sensors)
- Display Units:
- Absolute: Watts or dBm
- Relative: Percent or dB
- Display Resolution: Selectable resolution of 1.0, 0.1, 0.01, and 0.001 dB in log mode, or 1 to 4 digits in linear mode
- Default Resolution: 0.01 dB in log mode, 3 digits in linear mode
- Accuracy Instrumentation
- Absolute: ± 0.02 dB (log) or ± 0.5% (linear). Add the corresponding power sensor linearity percentage
- Relative: ± 0.04 dB (log) or ± 1.0% (linear). Add the corresponding power sensor linearity percentage
- Power Output: 1.00 mW (0.0 dBm). Factory set to ± 0.7%, traceable to the U.S. National Institute of Standards and Technology (NIST)
Options Included
- Opt.003 - Supplies rear-panel sensor input (power reference calibrator is on rear panel)
SA 286822
Specifications
-
MPN:E4419A
To request a price please fill out the form below...
Close