Anritsu MS9020C Optical Loss Test Set & Hard Black Case
Anritsu MS9020C Optical Loss Test Set & Hard Black Case
Anritsu MS9020C Optical Loss Test Set & Hard Black Case
Anritsu MS9020C Optical Loss Test Set & Hard Black Case
Anritsu MS9020C Optical Loss Test Set & Hard Black Case

Anritsu MS9020C Optical Loss Test Set & Hard Black Case

MPN: MS9020C
Product Brand: Anritsu
Product Condition: Used
Excluding VAT: £237.50
Including VAT: £285.00
Anritsu MS9020C Optical Loss Test Set & Hard Black Case

Model Number: MS9020C
In good condition and in full working order
Included:
1 x Optical Loss Test Set 1 x Operation Manual 1 x Hard Black Case 1 x AC Power Adapter ...
Information

Anritsu MS9020C Optical Loss Test Set & Hard Black Case

Model Number: MS9020C

In good condition and in full working order

Included:

  • 1 x Optical Loss Test Set
  • 1 x Operation Manual
  • 1 x Hard Black Case
  • 1 x AC Power Adapter & UK Mains Cable

More Info:

The MS9020D is a handy optical measuring instrument that incorporates an LD or an LED light source and an optical power meter. It can also be used for return loss measurement. Every unit of the LD light source (4 types), LED source (7 types), the sensors (8 types) and the return loss measurement unit (1 type) is a plug in type, for easy exchange and highest suitability for field use.

The MS9020D covers 0.66 µm, 0.85 µm, 1.3 µm, and 1.55 µm bands for optical loss measurement. In addition to the CW mode, it provides a modulated light mode with 270 Hz, 1 kHz, and 2 kHz modulation signals. Therefore, it is possible to measure optical loss over a wide dynamic range without stray light effect. This is the most suitable for single mode fiber measurement. For return loss, 1.3 µm band single mode fibers can be measured in the 0 to 40 dB range. As a power meter, every sensor has a wavelength calibration function of 5 nm steps at 3 wavelengths, so absolute values can be read directly.

MS9020D (mainframe)

Unit display W, W (REL), dBm, dB (REL) selectable, 4 digits
Measurement resolution W/W (REL) display: 0.1 to 1%, dBm/dB (REL) display: 0.01/0.1 dB, Blanking is possible.
Auto power off Power turns off automatically after 5 minutes of no adjustment
Averaging On and off selectable
Wavelength sensitivity
characteristics compensation
Deviation of optical power sensor is compensated automatically in 5 nm steps.
Modulation CW, 270 Hz, 1 kHz, 2 kHz (2 kHz is for MA9621A only)
Power AC adapter, Ni-Cd battery, UM-3 Alkali/Manganese battery


Light sources (MS0901A, MS0902A, MS0904B, MS0905A, MS0906A, MS0902D, MS0903D, MS0908A, MS0909A)
* MS0903A and MS0904A are discontinued. MS0903A is replaced by MS0903D and MS0904A by MS0909A.

Applicable fiber GI,SM(ITU-T G.652),Plastics
Element LED,LD,EE-LED,FP-LD
Wavelength (um) 0.635, 0.66, 0.85, 1.3, 1.31, 1.55, 0.85/1.30, 1.3/1.55, 1.31/1.55
Optical output level:
CW mode (dBm)
-47 to -10 (LED), -3 (LD),-42 to -36(EE-LED),-3(FP-LD)


Optical sensors (MA9421A, MA9422A, MA9423A, MA9621A, MA9622A, MA9721A, MA9722A, MA9723A)

Wavelength range 0.38 to 1.8 um
Input Direct, connector adapter
Measurement range -70 to +20 dBm (CW)
 

AJ 276257 -1
Specifications
  • MPN:
    MS9020C

To request a price please fill out the form below...


Close