Your cart has 0 item(s), Totalling £0.00
Home > AV and Studio Equipment
Crestron ST-1700C Touch-Screen Multimedia Controller And CP2e Processor Unit
Click the image to expand

Crestron ST-1700C Touch-Screen Multimedia Controller And CP2e Processor Unit

Brand: Crestron
Product Condition: Used
Excluding VAT: £237.50
Including VAT:£285.00


Crestron ST-1700C Touch-Screen Multimedia Controller And CP2 Processor Unit

In good condition, full working order


  • 1 x Crestron ST-1700C Touchscreen Multimedia Remote Control
  • 1 x Crestron ST-DSN Docking Base
  • 1 x Crestron CP2 Control Processor
  • 1 x Crestron CNRFGWA Wireless Control Receiver
  • 1 x Extron SW VGA/ARS VGA RGB Switcher
  • 2 x Power Supplies

Crestron ST-1700 Specifications:

The SmarTouch ST-1700C from Crestron® is a stylish and compact 1-way wireless touch panel featuring a brilliant 5.7" active matrix touch screen and optional pushbuttons. Isys™ color graphics and long-range RF communications combine to deliver amazing touch panel performance with complete freedom of movement.

Touch Screen Display
  • Display Type: TFT Active matrix color LCD
  • Size: 5.7 inch (145 mm) diagonal
  • Aspect Ratio: 4:3 QVGA
  • Resolution: 320 x 240 pixels
  • Colour Depth: 16-bit, 64k colors
  • Illumination: Backlit fluorescent
  • Viewing Angle: ±65° horizontal, +65°/-40° vertical
  • Touch Screen: Resistive membrane


  • RF Transmitter: 433.92 (433) MHz 1-way RF
  • Range: Up to 300 feet typical, subject to site-specific conditions


  • DRAM: 8 MB
  • Flash: 4 MB
  • Maximum Project Size: 3 MB

Graphic Engine

  • 16-bit non-palette graphics; 65,536 colors; Synapse image rendering algorithm; local animation


  • Built-in transducer for “key click” sound


  • Power: 2.5mm barrel DC power jack; 12 Volt DC power input
  • Cresnet Upload: 3.5 mm mini TRS phone jack; Connects to Cresnet control network while uploading only


  • Model/Type: ST-BTPN battery pack, NiMH, 4.8 Volt, 4100 mAh
  • Usage per Charge: ~3 hours continuous use at full brightness, 20 hours in standby
  • Charging Time: 2.7 to 6 hours (depending upon use while charging)

Power Requirements

  • Power Pack: 18 Watts (1.5 Amps) @ 12 Volts DC; 120 Volts AC @ 60Hz power pack


  • Height: 3.85 in (98 mm)
  • Width: 8.75 in (223 mm)
  • Depth: 5.51 in (140 mm)
  • Weight: 1.85 lbs (0.84 kg) – not including battery

Crestron CP2 Control Processor Specifications:

Crestron 2-Series Control Systems are the brain of a complete integrated AV or automation solution.

Crestron CNRFGWA Wireless Control Receiver Specifications:

The CNRFGWA Gateway is an RF receiver that allows Crestron® 433 MHz 1-way RF wireless touchpanels and handheld remotes to communicate with the control system via the Cresnet® network. Each CNRFGWA affords a range of approximately 300 feet. Extended range can be achieved by distributing multiple gateways throughout a structure. Each gateway behaves as a Cresnet slave device requiring just one Cresnet wire to each gateway location.


  • RF Receiver: 433.92 (433) MHz 1-way RF, crystal locked
  • Device Compatibility: Supports up to 256 WPR-48 or CNRFHT remotes, or up to 16 ST-1550C or ST-1700C touch panels
  • Range: Up to 300 feet typical, subject to site-specific conditions and individual device capabilities, Minimum distance allowed between gateways is 50 feet


  • NET: 1 x 4-pin 5mm detachable terminal block, Cresnet slave port; Connects to Cresnet control network
  • ANTENNA: 1 x BNC female, connection for supplied antenna; Impedance: 50 Ohms

Controls & Indicators

  • ID CODE: 2 x Rotary DIP switches, for setting the Cresnet ID
  • SIGNAL 1 x Red LED, indicates reception of a valid RF signal
  • I.D. SELECT: 1 x Red LED, indicates communication established with control system
  • NET PWR: 1 x Green LED, indicates DC power supplied from Cresnet network

Power Requirements

  • Cresnet Power Usage: 3 Watts (0.125 Amps @ 24 Volts DC)


  • Height: 7.28 in (185 mm); 15.20 in (387 mm) with antenna
  • Width: 3.25 in (83 mm)
  • Depth: 1.35 in (35 mm)
  • Weight: 1.1 lb (0.5 kg)

Extron SW VGA/ARS VGA RGB Switcher Features:

  • 1 Video input to 8 Video Outputs
  • Inputs: Two with 15-pin HD connectors; 3.5 mm stereo mini jacks for audio
  • Output: 15-pin HD connector for video; captive screw connector for audio
  • 350 MHz (-3 dB) RGB video bandwidth
  • Compatible with VGA-QXGA and HDTV component video signals
  • ID bits from input 1 are routed to the primary output
  • Switches balanced and unbalanced stereo audio
  • Active PC audio buffering — Converts unbalanced PC audio to balanced, line level signals, eliminating noise over long cable runs.
  • Compatible with Extron VSW I AAP
  • Auto-input switching — Automatically switches to the highest-numbered input with an active video signal.
  • RS-232 control
  • Contact closure remote control — Two, four, and six input switchers only
  • IR control compatible (no controller included requires use of Extron IR 102 kit.)
  • Internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility.

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
 Delivery is with UPS
Any Questions relating to this item? Please call freephone 0800 328 4995 (from the UK) or +44 7500 924 339(from outside the UK)

LA 36742 36743 36744 36745 + 1x Power supply in 36727
LA 36746 - Needs P/S

To request a price please fill out the form below...