ETC ColorSource 20 CS20 40 Channel 20 Fader DMX512 Lighting Console
IN GOOD CONDITION AND IN FULL WORKING ORDER
- 1 x ETC ColorSource 20 CS20 7225A1000 40 Channel 20 Fader DMX512 Lighting Console
- 1 x AC Adapter
The CS20 20-Fader ColorSource Lighting Console from ETC is a touchscreen enabled 20 fader DMX 512 lighting control console. The twenty faders can support controlling up to forty fixtures, and each fader has its own individual programmable bump button. Built-into the unit is a touchscreen display that allows you to arrange a lighting plot with the fixtures you are using. Remote Device Management (RDM) allows the console to identify enabled fixtures and auto-populate and patch them.
The console is flexible, with four user definable master faders as well as five user definable control buttons. You can program and save a cue list with 999 cues, and the unit allows you to save lighting looks to 10 pages with 20 playbacks each. In addition, you can program repetitive light patterns and apply them to channels and call them up as needed.
The console follows DMX-512 protocol, allowing you to control up to 40 devices over 20 channels. On fixtures that support it, you can control more than just dimming, including control of DMX-supported aspects of some fixtures such as motion, color, or beam control.
The Stage Map display is one of the views on the touchscreen. It enables you to visually see and move fixtures on the units Stage Map to match the fixtures on the actual stage. Finger-tip control allows you to navigate around the map, select/deselect fixtures, and aids in rapidly programming your show.
Fader Mode and Bumps
The 20 Faders can be set to be in either channel or playbacsk mode. Two channel pages and ten playback pages are provided for creative programming. The operation of the bump button beneath each fader is dependent on the fader mode. When the faders are in channel mode, the bump buttons select/deselect the fader. When in playback mode, the bump button's behavior is based on the selected button mode.
Patching associates a console channel number with an address or block of addresses on the DMX output. Once you have patched in your fixtures, you can save your patch set up and recall it.
Remote Device Management
RDM enables fast set up by identifying any intelligent lights and automatically populates in Patch. This allows you to skip manually locating fixtures that are RDM compatible and speeds you on your way.
512 Channels of DMX Control
Supports up to 40 Fixtures/Devices
20 Faders with Bump Buttons
Touchscreen Stage Panel Display
Remote Device Management Compatible
Four User-Definable Master Faders
Five User-Definable Buttons
One Cue List with 999 Cues
10 Pages with 20 Playbacks
Programmable Lighting Effects
Playback pages with configurable modes10 (200 total)
5-pin DMX ports1
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND
by purchasers in the EU (excluding UK) who are VAT registered