Farnell D30 2T 30V 0-2A Dual Output Power Supply
In Good Condition
Full Working Order
- 1 x Farnell D30 2T 30V 0-2A Dual Output Power Supply
- Mains Input AC mains 110, 220, 240V 48-63Hz
- Mains Variation tolerated: +/-10%
- Line Regulation
- Constant voltage +/- 0.01% +2mV for +/- 10% mains change
- Constant current +/- 0.1% +1mA for +/- 10% mains change
- Load Regulation for a Zero to Full Load Change:
- Constant voltage +/- 0.01% +2mV.
- Constant current +/- 0.1% +1mA.
- Ripple & Noise
- Constant voltage <2mV pk-pk at full load
- Constant current 1mA pk-pk typical at full load.
- Output Impedance (C.V.) : 2 ohm measured at 1KHz and 23 deg.C.
- Transient Recovery Time:
- 25us (typical) to recover within 50mV following a 10%-100% load change.
- Temperature Coefficient (typical): 0.01% per deg.C.
- Overload Protection: Adjustable current limiting from 1% to maximum.
- Meter(s) 4 digit, 12mm high red LED.
- Range: 0-39.99V Over-range indicated by OFL
- Resolution 10mV
- Accuracy: +/- 0.2% reading +/- 0.1% full scale at 23 deg.C
- External Voltage Measurement:
- By push button selection. The voltmeter can be used to measure external voltages in the range 0-39.99V.
- Input Impedance: 1Mohm approx.
- Isolation: Input sockets are fully isolated from output terminals when operated in external mode.
- Current Meter
- Range: 0-3.999A
- Resolution: 1mA
- Accuracy: +/- 0.3% reading +/- 0.1% full scale at 23 deg.C