Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp
Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp
Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp
Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp
Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp

Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp

MPN: Fluke 325 i400s
Product Brand: Fluke
Product Condition: Used
Excluding VAT: £665.00
Including VAT: £798.00
Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp Model No: Fluke 43B & AC Current Clamp1
In Good Condition and Full working Order
Included:

1 x Fluke 43B Single Phase Power Quality Analyzer 1 x Fluk...
Information
Fluke 43B Single Phase Power Quality Analyzer Set With Fluke i400s AC Clamp

Model No: Fluke 43B & AC Current Clamp1

In Good Condition and Full working Order

Included:

  • 1 x Fluke 43B Single Phase Power Quality Analyzer
  • 1 x Fluke i400s AC Current clamp
  • 1 x Alligatorclip AC85A (RED)
  • 1 x Alligatorclip AC85A (BLACK)
  • 1 x Test Lead TL24 (RED)
  • 1 x Test Lead TL24 (BLACK)
  • 1 x Industrial Alligator Banana (RED)
  • 1 x Industrial Alligator Banana (BLACK)
  • 1 x TestPins 2mm TP1 (RED)
  • 1 x TestPins 2mm TP1 (BLACK)
  • 1 x TestPins 4mm TP4 (RED)
  • 1 x TestPins 4mm TP4 (BLACK)
  • 1 x VPS40-III - 10:1 Voltage Probe Set 40MHz
  • 1 x Infra Red USB Lead
  • 1 x AC Adapter
  • 1 x Carry Case
Fluke 43B
Product Details
Fluke 43B Power Quality Analyser Voltage, current and power harmonics to the 51st, phase angle and THD Sag and swell measurement down to one cycle, recorded over time Voltage, current and frequency measurement, and waveform display Power measurements - watts, power factor, displacement power factor, VA and Var
20 measurement memory to save/recall screens and data with cursor readings Captures up to 40 voltage transients Ohms, continuity and capacitance measurement Temperature scaling for temperature accessories
Calculates 3-phase power on balanced loads.
Specifications
AttributeValue
Absolute Maximum Current Measurement1250kA
Absolute Maximum Power Measurement1.56GW
Number of Phases1, 3
Maximum Voltage600V ac
Best Voltage Measurement Accuracy±1% +10 Digits
Best Current Measurement Accuracy±1% + 10 Digits
Measurement TypeCapacitance, Continuity, Current, Diode Voltage Drop, Frequency, Harmonics, Inrush Current, Resistance, Sag, Swell, Transients, Voltage
Measurement StandardsEN61010-1
Interface TypeUSB
Power SourceBattery
Battery TypeRechargeable NiMH
Battery Life4 h
Dimensions232 x 115 x 50mm
Maximum Frequency15kHz
Minimum Frequency10 Hz
Length232mm
Minimum Operating Temperature0°C
Maximum Operating Temperature+50°C
Height50mm
Weight1.1kg
Model Number p43
Width115mm
Fluke i400s
Fluke i400s AC Current Clamp (400A) Details
The Fluke i400s is built for use with Fluke scope and power quality meters to enable current measurements up to 400A AC. Many power quality testers support up to four of these clamps, allowing full measurements of electrical systems.
CAT IV 600V and CAT III 1000V safety rated, the i400s can be used to test safely at all times and clamps securely around a conductor without the need to break the circuit and carry out invasive testing. It can used on conductors with a maximum diameter of 32mm and it is possible to use this device with multimeters as well
Fluke i400s Technical Specifications
Nominal current range:
40 A Range 0.5 A to 40 A
400 A Range 5 A to 400 A
Basic accuracy:
40 A Range 2% + 0.015 A (45-400 Hz)
400 A Range 2% + 0.04 A (45-400 Hz)
Phase Shift:
40 A Range
0.5 to 1 A Unspecified
1 A to 5 A 4°
5 A to 10 A 3°
10 A to 20 A 3°
20 A to 40 A 2°
40 A to 400 A NA
400 A Range
0.5 to 1 A NA
1 A to 5 A NA
5 A to 10 A Unspecified
10 A to 20 A 2°
20 A to 40 A 2°
40 A to 400 A 1.5°
Typical Bandwidth:
40 A Range 5 Hz - 10 kHz
400 A Range 5 Hz - 10 kHz
Output level(s):
40 A Range 10 mV/A
400 A Range 1 mV/A
Crest Factor:
40 A Range ≤ 3
400 A Range ≤ 3 to 300 A
≤ 2.5 to 400 A
Safety Specifications
Safety
CAT IV 600 V, CAT III, 1000 V
Maximum Non-Destructive Current
1000 V AC
Mechanical & General Specifications
Warranty
1 year
Maximum conductor size
32 mm (1.25 inches)
Output cable length
2.5 m (8.2 ft)
BNC Adapter
Yes
Dimensions
150 x 70 x 30 mm
Weight
114 g

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered - International Delivery is with UPS

CG 194588

Specifications
  • MPN:
    Fluke 325 i400s
  • Type:
    Clamp Meter

To request a price please fill out the form below...


Close