Information
GN-Nettest InterWatch-95000 ATM/LAN/WAN Protocol Analyzer
Model no:95000
Full Working Order
Mouse Button 1 And 2 Missing See Pictures
Included
- 1 x GN-Nettest InterWatch-95000 ATM/LAN/WAN Protocol Analyzer
Cards Included
- 1 x PPE - Primary Protocol Engine (P/N 01-103121)
- 64M RAM, VME64 Interface, ISA Bus Interface
- Supports multiple interface cards
- 1 x ETHERNET LAN Module
- 2 Ethernet ports on a single interface card
- Connectors: Dual AUI, BNC & RJ-45 (P/N 01-103102)
- 2 x 25.6 Mbps ATM Module
- Clock: BNC TTL (Ext. Line)
- 1 x Daughter Card - OC-3c/STM-1 SINGLE MODE
- Test Slots Occupied 2
- Processor i960
- Data Paths 1 Transmit 2 Receive 1 Regenerator
- Encoding STS-3c SONET or STM-1 SDN
- Fiber 8 micron core
- Wavelength 1260 to 1360 nm
- Connectors Dual Duplex SC
- BNC AC-coupled ECL (External Line Clock)
- Output Power -8 dBm (maximum) / -15 dBm (minimum)
- Receive Sensitivity -28 dBm (minimum) / -33 dBm (typical)
- Clocking 155.52 Mbps +/- 20 ppm (internal)
- 1 x Daughter Card
- ATM 25.6 Mbps
- Test Slots Occupied 2
- Processor i960
- Data Paths 1 Transmit 2 Receive 1 Regenerator
- Encoding NRZ1
- Connectors RJ-45 (Receive)
- RJ-45 (Transmit)
- BNC TTL male (Ext. sync clock)
- Transmit Clock 25.6 Mbps +/- 100 ppm
The InterWATCH 95000 is a multiport, integrated ATM/LAN/WAN protocol analyzer providing: a reasonable entry cost; field upgradeable; and full multi-unit remote control capability, through standard SNM, letting expensive technical resources use InterWATCH 95000 to manage a network from a remote central location.
The 95000 provides solutions to complex testing problems. The ATAK option provides extreme flexibility and the capability for unlimited "smarts" by embedding industry standard Tcl scripting features directly into the interWATCH 95000 system.
Also the 95000 can monitor and correlate traffic on native LAN with the Frame Relay traffic and encapsulated LAN traffic on the WAN. An extensive set of filters, statistics and protocol decodes are also available for analyzing LAN Emulation over ATM (LANE), Frame Relay over ATM (FUNI) and PNNI.
Specifications
- Simultaneous, Multiport ATM/LAN/WAN Analysis
- ATM standards
- ATM physical layer (GCRA, UPC, CDV, etc) and AAL layer testing
- ATM QoS (0.191): Cell Error, Cell Loss, Cell Delay, Cell Delay Variation, Cell Misinsertion (at line rate)
- ATM Signalling: Q.2931, UNI 3.0, 3.1, 4.0, (ILMI, PNNI, LANE, etc)
- ATM Network Impairment (Cell Errors, Cell Loss, Cell Misinsertion, etc)
- Legacy network support for Ethernet, Token Ring and Frame Relay
- Automated testing solutions - Pre-written packages and authoring tools
- Automatic higher layer protocol detection in real time
- Multiport traffic generation @ 100% Utilization (155Mb/s)
- 7-layer protocol analysis (decodes, filters, statistics and triggers)
SA 283334
Specifications
-
MPN:95000
To request a price please fill out the form below...
Close