Your cart has 0 item(s), Totalling £0.00
-
Home > Test Equipment
Mobilte CorTalk SPI1-P Plus SDL1 Portable GPS Interrupter Datalogger Cathodic
Click the image to expand
Mobilte CorTalk SPI1-P Plus SDL1 Portable GPS Interrupter Datalogger Cathodic Mobilte CorTalk SPI1-P Plus SDL1 Portable GPS Interrupter Datalogger Cathodic Mobilte CorTalk SPI1-P Plus SDL1 Portable GPS Interrupter Datalogger Cathodic Mobilte CorTalk SPI1-P Plus SDL1 Portable GPS Interrupter Datalogger Cathodic

Mobilte CorTalk SPI1-P Plus SDL1 Portable GPS Interrupter Datalogger Cathodic

Brand: Mobilite
MPN:SPI1-P SDL1 MSR2 NC
Product Condition: Used
Quantity:
Excluding VAT: £285.00
Including VAT:£342.00

Mobilte CorTalk SPI1-P Plus SDL1 Portable GPS Interrupter Datalogger Cathodic Protection

In good condition and full working order
Service not due till Sept 2015

 

Please click here for brochure


Includes

  • 1 x SPI-1 protable GPS interrupterplus SDL1 data logger card
  • 1 x Mobiltex corTalk MSR2Mechanical relay NC PN A15060201B2
  • 2 x Alligator clips and bananaleads
  • 1 x Analog input cable W16400CPI12
  • 1 x USB Data logger cableW16400CPI04
  • 1 x Cable W16400CPI03
  • 1 x GPS Antenna WS3914-3M-TNC
  • 1 x AC Power supply W16400CPI08
  • 1 x 12V car adapter W16400CPI07

SPI1-P Portable GPS Interrupter


Portable SPI1
 

Key Features

  • Operating temperature range of -30 to +70°C (-22 to +158°F)
  • Resolution of 1ms and maximum range of 60,000ms for Off and Cycle times
  • Excellent timing accuracy is attained with a 20 channel GPS receiver and a temperature compensated high stability crystal oscillator
  • Field programmable parameters allow use with a wide range of relays
  • Low current, solid state components provide maximum reliability
  • Upgraded to include a data logger module

SPI1-P: Full Features List

  • Detailed plain English menus provide easy and intuitive operation
  • Bright backlit alphanumeric display provides detailed presentation of all important parameters
  • Large dedicated function keys with audible annunciation facilitate accurate data entry
  • Color coded bright LED indicators focus the user’s attention to important status conditions
  • A resolution of 1ms and maximum range of 60,000ms for Off and Cycle times provides the user with very fine timing selection
  • Excellent timing accuracy is obtained with a 20 channel GPS receiver and a temperature compensated high stability crystal oscillator
  • Field programmable parameters allow device customization for use with a wide range of relays
  • Can immediately be operated in manual mode or be programmed with up to seven predefined schedules
  • Device configuration parameters and schedules are permanently stored in non-volatile memory with auto resume after a power interruption
  • A wide -30 to +70°C (-22 to +158°F) temperature range allows installation in extreme environments
  • Internal AC line synchronization provides rectifier switching at zero primary current conditions
  • The front keypad and display are fully sealed and waterproof for maximum reliability
  • GPS satellite and internal diagnostic self test routines assure proper operation
  • Small size of 229mm x 191mm x 97mm (9" x 7.5" x 3.8")
  • Holds rectifier power on when not interrupting
  • Software can be field upgraded using RS-232
  • Can be upgraded to include a single channel data logger with high precision time stamping and simultaneous AC and DC measurements
  • Low current solid state components provide maximum reliability
  • Pad-lockable, watertight, durable plastic case
  • Lid pocket for small cables and paperwork
  • Controls up to three separate external interruption relays simultaneously
  • Cloning cable available for direct unit-to-unit parameter cloning

SPI1-P: Specifications

Environmental:
Operating temperature range: -30 to +70°C (-22 to 158°F)
Power:
Operating voltage range: 10 to 22 volts AC or DC
Power (less relay drive power): 2W maximum
Power (including relay drive power): 20W maximum
Internal Battery: Rechargeable 6V sealed lead acid
Operational Time on Battery Power: 7 days (typ.)
Physical:
Size: 229mm x 191mm x 97mm (9” x 7.5” x 3.8”)
Weight: 2.6kg (5.72 lbs)
Display: 4 line by 20 character backlit LCD
Keypad: 20 key sealed membrane with annunciation
Enclosure: Water-tight durable plastic
Timing Accuracy:
AC line sync disabled: +/-0.5 ms
AC line sync enabled: +8.8/-0.5 ms
Interruption Output:
Relay drive voltage: 6 or 12 volts DC
Relay drive current: 1A maximum
Relay contact close dwell: 0-80 ms
Relay contact open dwell: 0-80 ms
Relay contact type: NO or NC
Relay type: External solid state or mechanical
Off Time: 1 – 59,999ms in 1ms steps
Cycle Time: 2 – 60,000ms in 1ms steps
Interruption schedules (date and time): 7 automatic (daily repeat optional) + 1 manual
Interruption & schedule memory: Non-volatile EEPROM
Synchronization:
GPS Receiver: Internal 20 channel
GPS Antenna: Low current magnetic mount with TNC
GMT Time-zone offset: +/- 12 hours
Reference offset adjustment: 5000ms in 1ms steps
SDL1 Board:
Operating temperature range: -30 to +70°C (-22 to 158°F)
Installation: Factory only
Channels: 1 (Simultaneous AC + DC)
Input Ranges: +/-12Vpeak, +/-20Vpeak, +/-60Vpeak, +/-150Vpeak
AC Measurement: True RMS
Analog to Digital Conversion:
Resolution: 16-bit
Maximum sampling rate: 100ksps
Storage Memory Type: Integral microSD card
Storage Memory Size: Approx. 1GB (1GB=1,000,000,000 bytes)
PC Connection: USB 2.0 Full-Speed (Appears as a Mass Storage Device to the PC)

 



​VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered
Delivery is with UPS


Any Questions?  Please call 020 8882 1111 from UK or +44 20 8882 1111 from outside the UK

SL 87333 SN 014704
SL 87334 SN 014930
SL 87335 SN 014702

To request a price please fill out the form below...

Close