Sun Microsystems Netra ST D130 Storage Array with 2 x 18.2gb
In good condition, all tested & working
Standard Interfaces |
SCSI:Two single-ended ports, 68-pin SCSI connector |
Internal Mass Storage |
Disk: Up to three NEBS compliant, 18.2- or 36.4-GB hot pluggable, Ultra SCSI hard drives |
Environment |
AC input: 100 - 240 VAC, 47 - 63 Hz, <2.0 A DC input: -48 to -60 VDC, <4.0 A Input power: 150 W Heat output: 512 BTU/hr Temperature*: Operating: 0° C to 40° C (32° F to 104° F) Humidity*: Operating: 5% to 90% relative humidity, noncondensing Altitude: Operating: 0 m to 3000 m (0 ft. to 10,000 ft.) Acoustic noise: Operating: 6.0 Bels Seismic: Meets GR-63-CORE requirements for earthquake risk zone 4 Number of cords: 1 Plug type-U.S.: NEMA 5-15P * Short term is defined as 96 consecutive hours of operating. |
Regulations(meets or exceeds the following requirements) |
Safety: UL 1950, CSA C22.2-No. 950, EN 60950 (73/23/EEC), IEC 950 Emissions: CFR Title 47 FCC Part 15, EN 55022 (89/336/EEC) Immunity: EMC Directive (89/336/EEC), EN50082-1 Telco environment: Telcordia GR-63-CORE, NEBS GR-1089-CORE, TR-NWT-000295 Certification: Telcordia: SR 3580 NEBS Level 3 certified |
Dimensions and Weights |
Height: 4.4 cm (1.73 in.) Width: 43.6 cm (17.2 in.) Depth: 47.2 cm (18.6 in.) Weight: (without drives) 5.9 kg (13 lb.) Shipping Weight: 9.5 kg (20 lb.) |
Delivery is with UPS
Any Questions relating to this item? Please call freephone 0800 328 4995(from the UK) or +44 7500 924 339(from outside the UK)
-
MPN:Netra ST D130
To request a price please fill out the form below...
Close