Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54, TV Reception
Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54, TV Reception
Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54, TV Reception
Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54, TV Reception
Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54, TV Reception

Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54, TV Reception

MPN: AC8000 Fibre Optic Dual Output Node
Product Brand: Teleste
Product Condition: Used
Excluding VAT: £142.50
Including VAT: £171.00
© Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54

In good condition, and in full working order

Included:
1 x Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54
The AC8000 is a dual a...
Information

Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54

In good condition, and in full working order

Included:

  • 1 x Teleste AC8000 Fibre Optic Dual Output Node 65VAC 44W IP54
The AC8000 is a dual active output node. It is based on fixed platform but
flexible modular solution. There is possible to have an optical receiver with
redundancy for downstream signal. The upstream channel can also be fully
redundant with double transmitter solution. When more segmentation is
needed, both optical transmitters can be fed by separate individual return
signals. The amplifier stages are based on high performance hybrids, what
makes the used output level range especially wide. By using internal splitting
there can be available even 3 separate outputs.
The AC8000 is having a plug-in module slot for transponder unit, which can be
locally controlled by lap top or hand terminal. The transponder unit does the
measurements and controls the ingress switches on the mother board. Double
PSUs are also monitored by transponder. This solution increases the reliability
of the station to even higher level. Electrical level adjustment modules can be
installed. They make it possible to have adjusted output levels through EMS or
using the fully electrical ALC function.

AC8000 features:

  • Integrated splice organizing option
  • Wide range of upstream laser technologies available
  • Efficient surge and ESD protection
  • Redundancy power supply
  • Amplifiers stages use GaAs technology
  • 3 outputs
  • Electrical level control
  • Spectrum analyser function as an option
  • HMS compatible EMT module available
  • Fixed station memory for electrical identification

Parameter Specification Note
Downstream signal path
Light wavelength 1290…1600 nm
Optical input power range - 7…+ 2dBm
Frequency range 47 / 54 / 70 / 85...862 MHz
Return loss 20 dB
Gain limited output level 2 x 110 dBμV
Output level adjustment 20 dB
Mid-stage slope 8 dB
Flatness ± 0.5 dB
Test point - 20 dB
Transponder connection - 19 dB
Noise current density 5 pA/√Hz
CTB 42 channels 114.0 dBμV
CSO 42 channels 115.5 dBμV
XMOD 42 channels 110.0 dBμV
CTB 110 / 77 channels 69.0 / 78.0 dBc
CSO 110 / 77 channels 72.0 / 76.0 dBc
XMOD 110 / 77 channels 63.0 / 72.0 dBc

Upstream signal path
Frequency range 5...30 / 42 / 50 / 65 MHz
Return loss 18 dB
Ingress switching 0 / - 6 / < -45 dB
Input level 62.0 dBμV
Transponder connection - 26 dB

General
Power consumption 40 W
Supply voltage 27...65 VAC, ±35...90 VDC
Maximum current feed through 10.0 A / port
Hum modulation 70 dB
Optical connectors SC/APC, FC/APC, E-2000
Output connectors PG11
Test point connectors F- female
Dimensions 245 x 255 x 145 mm h x w x d
Weight 4.0 kg
Operating temperature -40...+55 °C
Class of enclosure IP 54
EMC EN50083-2
ESD 4 kV 20
Surge 6 kV 21

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered

Any Questions? Please call 020 8882 1111 from UK or +44 208882 1111 from outside the UK

Delivery is with UPS
PE 125172-9,.24/3/2015
Specifications
  • MPN:
    AC8000 Fibre Optic Dual Output Node

To request a price please fill out the form below...


Close