TOA VM-2120 System Management Amplifier 120W 50 Hz - 16 kHz S/N 60dB + Manual

MPN: CAP448
Product Brand: TOA
Product Condition: Used
Excluding VAT: £142.50
Including VAT: £171.00
TOA VM-2120 System Management Amplifier 120W 50 Hz - 16 kHz S/N 60dB Model: VM-2120 In Good Condition
Full Working Order Supplied with power cord

Includes:
1 x TOA VM-2120 System Management Amplifier 120W 50 Hz - 16 kHz S/N 60dB ...
Information
TOA VM-2120 System Management Amplifier 120W 50 Hz - 16 kHz S/N 60dB
Model: VM-2120
In Good Condition
Full Working Order
Supplied with power cord

Includes:

  • 1 x TOA VM-2120 System Management Amplifier 120W 50 Hz - 16 kHz S/N 60dB
  • 1 x Set of Manuals
Details:
The VM-2120 is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-zone selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions (optional EV-200M is required) in the emergency situation. Broadcast can be made from an optional RM-200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, for 100 V› application the unit features the surveillance function (optional SV-200MA is required) which automatically checks the system for failures.
  • Programmable system management amplifier
  • 120 W
  • 5 switchable high impedance speaker zones with adjustable attenuators
  • 9 units can be combined to increase the output power and number of zones
  • 4 input channels come with volume and bass/ treble control on the front panel
  • Both BGM inputs with level pre-adjustment
  • The routing to the zones of the 3 microphone/ line level inputs and the telephone paging input can be pre-set
  • Emergency power input, remote power control, 4 built-in chimes etc.
Specifications:
  • Power source: 230 V AC, 50 / 60 Hz
  • Rated output: 120 W total into 5 zones
  • Frequency response: 50 Hz - 16 kHz
  • Distortion: < 1 %
  • Power consumption: 37 W (no output), 201 W (at rated output)
  • Current consumption (value): 5.2 A
  • S/N ratio: 60 dB (or more)
  • Inputs:
    • MIC (-60 dBV) /LINE (-10 dBV), balanced x3
    • Telephone (-10 dBV, balanced) x1
    • BGM (-20 dBV, unbalanced, stereo RCA jacks) x2
    • 100V x1
  • Outputs:
    • Speaker lines with attenuator, selectable x5
    • Direct speaker output x1
    • Line (0 dBV, unbalanced, RCA jack) x1
    • Recording (0 dBV, unbalanced, RCA jack) x1
    • Preamplifier (0 dBV, unbalanced, RCA jack) x1
  • Control input:
    • Contact input, open voltage: 3.3 VDC, short-circuit current max. 1 mA
    • activation of inputs 1-3 x3
    • 25-pin female D-sub connector:
    • Activation of messages (when EV-200M is installed) x5
    • Activation of power
    • Activation and stop of emergency broadcast
    • Unit's broadcast cutoff
  • Control output:
    • 5 relay contacts for external attenuator control. Open collector output, withstand voltage: 30 V DC, operating current: under 10 mA
    • 25-pin female D-sub connector:
    • Irregularity of communications with the Remote Microphone and an expansion amplifier
    • AC power condition
    • DC power condition
    • Irregularity of the sound source of the Voice Announcement
    • Board
    • Failure (FAULT) indication on
    • Power switch on
  • Indicator: Zone, all-call, emergency, fault, power,5-step level bargraph
  • Current consumption: 5.2 A
  • Operating temperature: 0 - 40 °C
  • Finish: ABS resin, Steel plate, paint, dark grey
  • Dimensions: 419 x 143.3 x 355.7 mm (W x H x D)
  • Weight: 12.5 kg
 

LJM 286736

Specifications
  • MPN:
    CAP448

To request a price please fill out the form below...


Close