Fujikura Arc Fusion Fiber Optic Splicer 31S S017081 High Precision CT30 Cleaver

Brand: Fujikura
Cleave Count: 0
Fusing Count: 3878
MPN: S017081, CT-30
Country/Region of Manufacture: Japan
Fujikura Arc Fusion Fiber Optic Splicer 31S S017081 High Precision CT-30 Cleaver
Model: 31S
Splicer Model: CT-30

In good condition and In full 
Everything Included Is As Per Photos

Details:
The 31S fusion splicer features a dual-camera active V-groove fiber alignment and provides consistent performance at high speed: 6-second splicing in SM mode and 25-second shrink time, tube-heating with 60mm sleeve. It is used with SM, MM, DSF and NZDS fibers, from 125µm cladding diameter up to 3mm coating diameter. The 31S offers 10,000 results storage, 5-16mm cleaves length splicing, 100 splice and 30 heating modes, 2 axis 2CMOS camera with 5" color LCD, plus PC connection via USB. It is shock, dust & moisture resistant.
Manufacturers Specifications:
Model: 31S Splicer
Applicable Fibers: Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655)
Cladding Diameter: 125 μm
Coating Diameter: 250 μm up to 3 mm
Fiber Cleave Length: 5 mm to 16 mm
Typical Average Splice Loss: 0.03 dB (SM), 0.01 dB (MM), 0.05 dB (DS) and 0.05 dB (NZDS)
Splicing Time: Typical 6 sec with SM
Arc Calibration Method: Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes: Total 100 splice modes
Splice Loss Estimate: Based on two camera, active cladding alignment data
Storage of Splice Result: 10,000 splice results
Fiber Display: 5 inch TFT color LCD with X or Y view or both X and Y view simultaneously
Magnification: 200X for single-camera view and 132X magnification for dual-camera view
Viewing Method: 2 axis CMOS camera
Operating Condition: Altitude: 0 to 5,000 m above sea level, -10° to +50° C, Humidity: 0 to 95% RH, non-dew
Mechanical Proof Test: 1.96 N
Tube Heater: 30 heating modes
Tube Heating Time: Typical 25 sec with FP-60 (60 mm) sleeve
Protection Sleeve Length: 60 mm, 40 mm, micro
Splice/Heat Cycles with Battery: Typical 200 cycles with BTR-11A
Electrode Life: 5,000 splices
Power Supply: Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery
Terminals: USB 2.0
Wind Protection: Maximum wind velocity of 15 m/s. (34 mph)
Dimensions: 131 x 201 x 79 (mm)
Weight: 1,300 g (2.85 lbs) with battery

Included
1 x Fujikura Arc Fusion Fiber Optic Splicer 31S
1 x Fujikura High Precision CT-30 Cleaver In Protective Case
1 x 14.4V Rechargeable Lithium Ion Battery Pack
1 x Protective Carrying Case