QSC DCP 100 Digital Cinema Processor Booth Monitor Crossover EQ DSP Rackmount

Brand: QSC
MPN: DCP 100
Rack Unit Height: 2U
Colour: Grey
Analogue/Digital: Digital
Form Factor: Rack Mountable
Type: Crossover
Number of Channels: HD-15 (8)
Line voltage requirements: 100 VAC – 240 VAC, 50/60 Hz
Model: DCP 100
Country/Region of Manufacture: America

QSC DCP 100 Digital Cinema Processor Booth Monitor Crossover DSP Rackmount

In good condition and full working order

A Cinema Processor, Booth Monitor and Digital Crossover along with network control and monitoring of DSP, amplifiers and speakers in one integrated package.
Everything you need between server and amps.
QSC's Digital Cinema Processor, the DCP 100, builds on the legacy of DCM and Basis to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. The DCP 100 offers most of the features of the DCP 300 but at a lower price point for 8-channel systems that also don’t require CobraNet™ network audio distribution.
Designed to be used with QSC's Digital Cinema Amplifiers (DCA) and featuring advanced DSP presets for QSC's Digital Cinema Speakers (DCS), the DCP 100 optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DCP 100 covers cinema systems with 3 passive or bi-amp screen channels and 2 or 4 surround channels. The DCP 100 is also compatible with analog cinema processor formats including Dolby® Digital Surround-EX and DTS-ES and features an 8-channel analog input for integration with 35 mm audio systems.

Features:
Digital Input for up to 8 Channels of audio.
Network control and monitoring via SNMP.
Serial automation control via RS-232.
Analog Inputs for film processors, non-sync and Mic/line.
Master volume and full 1/3 Octave Graphic EQ on all channels.
Booth Monitor with touch screen control for easy operation.
Digital Loudspeaker Crossovers - three passive or bi-amp screen channels.
Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control.
Replaces the DCM-1, DCM-10 and DCM-10D for digital projection retrofits.
Dual power supplies with load sharing for seamless operation in the event of failure.
SD Memory card for quick unit swap - restores all settings.
Multiple Bypass modes routes audio around failed components to ensure that the show will go on.

Front Panel Controls:
Power switch Rocker switch
Mute control Push button
Auditorium fader Rotary encoder
Monitor volume/parameter adjust Rotary encoder
Menu-driven LCD Touch control LCD

Input/Output Ports: DB-25: AES3/EBU channels 1-8,DB-25: AES3/EBU channels 15 & 16 (HI/VI),DB-25 — Analog audio channels 1-8,XLR — Mic (+ phantom pwr) or line level,RCA — Stereo digital audio interface and Lt/Rt Mat,RCA (2) — Stereo Left and Right and Lt/Rt Matrix,HD-15 (8) — QSC amplifier interface

Rear Panel Connectors:
D-Cinema input DB-25: AES3/EBU channels 1-8 / DB-25: AES3/EBU channels 15 & 16 (HI/VI)
Audio formats 5.1, 5.1 EX, 7.1 DS
Analog input DB-25 — Analog audio channels 1-8
Universal Mic/Line input XLR — Mic (+ phantom pwr) or line level
S/PDIF input RCA — Stereo digital audio interface and Lt/Rt Matrix
RCA (L/R) inputs RCA (2) — Stereo Left and Right and Lt/Rt Matrix
DataPort outputs HD-15 (8) — QSC amplifier interface
Automation inputs 6-pin Euro-style (x2) – TTL compatible dry contact closure
Serial Control DB-9 RS-232 serial interface
Logic output 4-pin Euro-style (x2) – outbound control
Relay outputs 6-pin Euro-style (x2) – outbound control
USB port Config and management interface
QSControl and SNMP RJ45 10/100 Mbps network management
SD card receptacle Configuration memory card (1 GB min)

H.I. and V.I. impaired outputs:
Output stage type Single ended (balanced Z)
Output impedance 50 Ohms
Nominal output level -11.8 dBu (200 mVrms)
Loading requirements Rmin = 2k Ohms, Cmax = 4nF

QSControl™ network/ SNMP
Protocol Standard TCP/IP implementation over Ethernet or Fast Ethernet
Data rate 10/100 Mbps
Connection requirements Cat-5 UTP cable or better (100m max length) / Direct connection to wired network switch ports only / Dedicated LAN or VLAN
Dimensions (H/W/D): 5.25" x 19" x 15.2" (133 mm x 483 mm x 386 mm)
Line voltage requirements 100 VAC – 240 VAC, 50/60 Hz
Weight 16.6 lb (7.5 kg)

1x QSC DCP 100 Digital Cinema Processor Booth Monitor Crossover DSP Rackmount